HX HJT12/24-630A Elbow Connector

HX HJT12/24-630A Elbow Connector

HX HJT12/24-630A Shielded End- Connector


630AT Back connector can be use together with the T Fore connector and some other back connector , it can be provide more branches, and they can not together with the bushing directly,cover the back protection cap on the end of the blanking cover.


Provides a fully screened and fully submersible separable connection when mated with the pro per bushing or plug.
·Can be used underthe circumstances.
·Built-in capacitive test point to determine the circuit status or install a fault indicato r.
·No minimum phase clearance requirements.
·Mounting can be ve rtical, horizontal, or any angle in between.

Scope of Delivery

·T back connector
·Conductor cable lug
·Connect lug
·Two head screw
·Silicone Lubricant. Clearing Paper
·Installation Instruction Sheet
·Quality Certificate

 Inference Information

①Enterprise code
②Shielded End-Connector
③Continuous operating voltage
④Continuous nominal current

Product Structure

1.TWO HEAD SCREW: To make sure have a good contact with the apparatus bushing.

2.INSULATION: Moulded EPDM insulating ru bber is form ulated and mixed in-house to ensu re hig h quality.

3.INSULATING PLUG: Mold ed epoxy insulating plug provides excellent electrical, thermal and mechanical reliability.

4.SEMI-CONDUCTIVE INSERT: Moulded EPDM conducting rubberscreen controls electrical stress.

5.STRESS RELIEF: The configuration of the outer screen and the cable adapter provide cable stress relief.

6.GROUNDING EYE: Moulded intothe externalscreen for connection ofan earthing wire.

7.Out Semi-conductive shield: The combination of the prefabricated EPDM conductive rubber and cable shielding can realize the shielding continuity and ensure the outer semi-conductive layer is grounded.

8.Crimping terminal: All copper or copper aluminum crimping terminals are suitable for copper or aluminum conductors.

 Order information


Reference No. Conductor cross section(mm²) Stretch range over insulation(mm)  Cable Type Size of stress cone
HX HJT-12/630-25 25 16.6 8.7/15 A
HX HJT-12/630-35 35 17.6 8.7/15 A
HX HJT-12/630-50 50 19 8.7/15 A
HX HJT-12/630-70 70 20.6 8.7/15 B
HX HJT-12/630-95 95 22.2 8.7/15 B
HX HJT-12/630-120 120 23.6 8.7/15 C
HX HJT-12/630-150 150 25.2 8.7/15 C
HX HJT-12/630-185 185 26.7 8.7/15 C
HX HJT-12/630-240 240 29 8.7/15 D
HX HJT-12/630-300 300 31.2 8.7/15 D
HX HJT-12/630-400 400 34.4 8.7/15 E
HX HJT-12/630-500 500 37.2 8.7/15 F


Reference No. Conductor cross section(mm²) Stretch range over insulation(mm) Cable Type Size of stress cone
HX HJT-24/630-35 35 18.6 43454 B
HX HJT-24/630-50 50 19.6 43454 B
HX HJT-24/630-70 70 21 43454 B
HX HJT-24/630-95 95 22.6 43454 C
HX HJT-24/630-120 120 24.2 43454 C
HX HJT-24/630-150 150 25.6 43454 C
HX HJT-24/630-185 185 27.2 43454 D
HX HJT-24/630-240 240 28.7 43454 D
HX HJT-24/630-300 300 31.1 43454 E
HX HJT-24/630-400 400 33.2 43454 E

NOTE:The ca ble range is the basic element for choosing the product’s type.The conductor size is just for a reference

Message Feedback